feat: 新增香橙派 Zero One 设备构建支持

- 在 build_img.sh 中新增 orangepi-zero 构建目标支持
- 添加 orangepizero_rootfs 函数处理 Armbian 镜像准备和分区调整
- 实现 config_orangepizero_files 函数清空模块配置优化启动
- 更新 GitHub Actions 工作流支持 orangepi-zero 设备 CI 构建
- 针对低内存设备优化配置，扩展 600MB 存储空间
- 完善构建系统支持更多单板计算机平台

.github/workflows/build_img.yaml

@@ -9,11 +9,13 @@ on:
         type: choice
         options:
           - onecloud
+          - onecloud-pro
           - cumebox2
           - chainedbox
           - vm
           - e900v22c
           - octopus-flanet
+          - orangepi-zero
           - all
       create_release:
         description: 'Create GitHub Release'

build/build_img.sh

@@ -59,7 +59,7 @@ build_target() {
         onecloud)
             onecloud_rootfs
             local arch="armhf"
-            local device_type="gpio"
+            local device_type="gpio-onecloud"
             local network_type="systemd-networkd"
             ;;
         cumebox2)
@@ -97,6 +97,20 @@ build_target() {
             local network_type=""
             NEED_PREPARE_DNS=true
             ;;
+        onecloud-pro)
+            onecloud_pro_rootfs
+            local arch="aarch64"
+            local device_type="gpio-onecloud-pro video1"
+            local network_type=""
+            NEED_PREPARE_DNS=true
+            ;;
+        orangepi-zero)
+            orangepizero_rootfs
+            local arch="armhf"
+            local device_type=""
+            local network_type=""
+            NEED_PREPARE_DNS=true
+            ;;
         *)
             echo "错误：未知或不支持的目标 '$target'" >&2
             exit 1
@@ -124,12 +138,18 @@ build_target() {
         chainedbox)
             pack_img "Chainedbox"
             ;;
-         e900v22c)
+        e900v22c)
             pack_img "E900v22c"
             ;;
-         octopus-flanet)
+        octopus-flanet)
             pack_img "Octopus-Flanet"
             ;;
+        onecloud-pro)
+            pack_img "Onecloud-Pro"
+            ;;
+        orangepi-zero)
+            pack_img "Orangepi-Zero"
+            ;;
         *)
             echo "错误：未知的打包类型 for '$target'" >&2
             ;;
@@ -148,7 +168,7 @@ build_target() {
 # 检查是否提供了目标参数
 if [ -z "$1" ]; then
     echo "用法: $0 <target|all>"
-    echo "可用目标: onecloud, cumebox2, chainedbox, vm, e900v22c, octopus-flanet"
+    echo "可用目标: onecloud, cumebox2, chainedbox, vm, e900v22c, octopus-flanet, onecloud-pro, orangepi-zero"
     exit 1
 fi
 
@@ -167,6 +187,8 @@ if [ "$1" = "all" ]; then
     build_target "vm"
     build_target "e900v22c"
     build_target "octopus-flanet"
+    build_target "onecloud-pro"
+    build_target "orangepi-zero"
     echo "信息：所有目标构建完成。"
 else
     build_target "$1"

build/functions/common.sh

@@ -244,6 +244,37 @@ download_file_if_missing() {
     return 1
 }
 
+# 下载 rc.local 文件
+download_rc_local() {
+    local platform_id="$1"
+    local rc_local_path="$SRCPATH/image/$platform_id/rc.local"
+    local relative_path="image/$platform_id/rc.local"
+    local remote_url="$REMOTE_PREFIX/$relative_path"
+
+    echo "信息：检查是否需要下载 rc.local 文件 ($platform_id)..."
+
+    # 如果本地文件不存在，尝试下载
+    if [ ! -f "$rc_local_path" ]; then
+        echo "信息：本地 rc.local 文件不存在，尝试从远程下载..."
+        ensure_dir "$(dirname "$rc_local_path")"
+
+        if curl -sSL --fail "$remote_url" -o "$rc_local_path"; then
+            echo "信息：成功下载 rc.local 文件：$remote_url"
+            # 在 GitHub Actions 环境中记录下载的文件
+            if is_github_actions; then
+                echo "$rc_local_path" >> "$DOWNLOADED_FILES_LIST"
+            fi
+            return 0
+        else
+            echo "信息：远程 rc.local 文件不存在或下载失败：$remote_url"
+            return 1
+        fi
+    else
+        echo "信息：使用本地 rc.local 文件：$rc_local_path"
+        return 0
+    fi
+}
+
 # 清理下载的文件（仅在 GitHub Actions 环境中）
 cleanup_downloaded_files() {
     if is_github_actions && [[ -f "$DOWNLOADED_FILES_LIST" ]]; then

build/functions/devices.sh

@@ -10,7 +10,7 @@ onecloud_rootfs() {
     local bootfs_sparse="$TMPDIR/6.boot.PARTITION.sparse"
     local rootfs_sparse="$TMPDIR/7.rootfs.PARTITION.sparse"
     local bootfs_loopdev="" # 存储 bootfs 使用的 loop 设备
-    local add_size_mb=400
+    local add_size_mb=600
 
     echo "信息：准备 Onecloud Rootfs..."
     ensure_dir "$TMPDIR"
@@ -66,9 +66,10 @@ onecloud_rootfs() {
 }
 
 cumebox2_rootfs() {
-    local source_image="$SRCPATH/image/cumebox2/Armbian_25.2.2_Khadas-vim1_bookworm_current_6.12.17_minimal.img"
+    local source_image="$SRCPATH/image/cumebox2/Armbian_24.8.1_Khadas-vim1_bookworm_current_6.6.47_minimal.img"
     local target_image="$TMPDIR/rootfs.img"
     local offset=$((8192 * 512))
+	local add_size_mb=900
 
     echo "信息：准备 Cumebox2 Rootfs..."
     ensure_dir "$TMPDIR"
@@ -77,7 +78,10 @@ cumebox2_rootfs() {
     download_file_if_missing "$source_image" || { echo "错误：下载 Cumebox2 原始镜像失败" >&2; exit 1; }
     
     cp "$source_image" "$target_image" || { echo "错误：复制 Cumebox2 原始镜像失败" >&2; exit 1; }
-
+	
+	echo "信息：扩展镜像文件 (${add_size_mb}MB)..."
+ 	sudo dd if=/dev/zero bs=1M count="$add_size_mb" >> "$target_image" || { echo "错误：扩展镜像文件失败" >&2; exit 1; }
+  
     echo "信息：调整镜像分区大小..."
     sudo parted -s "$target_image" resizepart 1 100% || { echo "错误：使用 parted 调整分区大小失败" >&2; exit 1; }
 
@@ -159,7 +163,7 @@ e900v22c_rootfs() {
     local source_image="$SRCPATH/image/e900v22c/Armbian_23.08.0_amlogic_s905l3a_bookworm_5.15.123_server_2023.08.01.img"
     local target_image="$TMPDIR/rootfs.img"
     local offset=$((532480 * 512))
-    local add_size_mb=400
+    local add_size_mb=600
 
     echo "信息：准备 E900V22C Rootfs..."
     ensure_dir "$TMPDIR"
@@ -188,11 +192,11 @@ e900v22c_rootfs() {
 }
 
 octopus_flanet_rootfs() {
-    local source_image="$SRCPATH/image/octopus-flanet/Armbian_24.11.0_amlogic_s912_bookworm_6.1.114_server_2024.11.01.img"
+    local source_image="$SRCPATH/image/octopus-flanet/Armbian_25.05.0_amlogic_s912_bookworm_6.1.129_server_2025.03.02.img"
     local target_image="$TMPDIR/rootfs.img"
     local boot_offset=$((8192 * 512))
     local rootfs_offset=$((1056768 * 512))
-    local add_size_mb=400
+    local add_size_mb=600
     local bootfs_loopdev=""
 
     echo "信息：准备 Octopus-Planet Rootfs..."
@@ -231,6 +235,71 @@ octopus_flanet_rootfs() {
     echo "信息：Octopus-Planet Rootfs 准备完成，loop 设备 $LOOPDEV 已就绪。"
 }
 
+onecloud_pro_rootfs() {
+    local source_image="$SRCPATH/image/onecloud-pro/Armbian-by-SilentWind_24.5.0_amlogic_Onecloud-Pro_jammy_6.6.28_server.img"
+    local target_image="$TMPDIR/rootfs.img"
+    local boot_offset=$((8192 * 512))
+    local rootfs_offset=$((1056768 * 512))
+    local add_size_mb=600
+    local bootfs_loopdev=""
+
+    echo "信息：准备 Octopus-Planet Rootfs..."
+    ensure_dir "$TMPDIR"; ensure_dir "$BOOTFS"
+    
+    # 自动下载源镜像文件（如果不存在）
+    download_file_if_missing "$source_image" || { echo "错误：下载 Octopus-Planet 原始镜像失败" >&2; exit 1; }
+    
+    cp "$source_image" "$target_image" || { echo "错误：复制 Octopus-Planet 原始镜像失败" >&2; exit 1; }
+
+    echo "信息：调整镜像分区大小 (分区 2)..."
+    sudo parted -s "$target_image" resizepart 2 100% || { echo "错误：使用 parted 调整分区 2 大小失败" >&2; exit 1; }
+
+    echo "信息：设置 rootfs 分区的 loop 设备..."
+    find_loop_device # 找 loop 给 rootfs
+    echo "信息：将 $target_image (偏移 $rootfs_offset) 关联到 $LOOPDEV..."
+    sudo losetup --offset "$rootfs_offset" "$LOOPDEV" "$target_image" || { echo "错误：设置 rootfs 分区 loop 设备 $LOOPDEV 失败" >&2; exit 1; }
+
+    echo "信息：检查并调整文件系统大小 (在 loop 设备上)..."
+    sudo e2fsck -f -y "$LOOPDEV" || { echo "警告：e2fsck 检查 $LOOPDEV 失败" >&2; exit 1; }
+    sudo resize2fs "$LOOPDEV" || { echo "错误：resize2fs 调整 $LOOPDEV 大小失败" >&2; exit 1; }
+
+    echo "信息：Octopus-Planet Rootfs 准备完成，loop 设备 $LOOPDEV 已就绪。"
+}
+
+orangepizero_rootfs() {
+    local source_image="$SRCPATH/image/orangepi-zero/Armbian_community_25.11.0-trunk.208_Orangepizero_bookworm_current_6.12.47_minimal.img"
+    local target_image="$TMPDIR/rootfs.img"
+    local offset=$((8192 * 512))
+    local add_size_mb=600
+
+    echo "信息：准备 Orange Pi Zero Rootfs..."
+    ensure_dir "$TMPDIR"
+
+    echo "信息：下载或使用本地 Orange Pi Zero 原始镜像..."
+    download_file_if_missing "$source_image" || { echo "错误：下载 Orange Pi Zero 原始镜像失败" >&2; exit 1; }
+
+    cp "$source_image" "$target_image" || { echo "错误：复制 Orange Pi Zero 原始镜像失败" >&2; exit 1; }
+
+    echo "信息：扩展镜像文件 (${add_size_mb}MB)..."
+    sudo dd if=/dev/zero bs=1M count="$add_size_mb" >> "$target_image" || { echo "错误：扩展镜像文件失败" >&2; exit 1; }
+
+    echo "信息：调整镜像分区大小..."
+    sudo parted -s "$target_image" resizepart 1 100% || { echo "错误：使用 parted 调整分区大小失败" >&2; exit 1; }
+
+    find_loop_device
+    sudo losetup -P "$LOOPDEV" "$target_image" || { echo "错误：设置 loop 设备失败" >&2; exit 1; }
+
+    echo "信息：检查并调整文件系统大小..."
+    sudo e2fsck -y -f "${LOOPDEV}p1" || { echo "错误：文件系统检查失败" >&2; exit 1; }
+    sudo resize2fs "${LOOPDEV}p1" || { echo "错误：调整文件系统大小失败" >&2; exit 1; }
+
+    # 重新设置 LOOPDEV 为分区
+    sudo losetup -d "$LOOPDEV"
+    sudo losetup "$LOOPDEV" "$target_image" -o "$offset" || { echo "错误：重新设置 loop 设备失败" >&2; exit 1; }
+
+    echo "信息：Orange Pi Zero Rootfs 准备完成。"
+}
+
 # --- 特定设备的文件配置函数 ---
 
 config_cumebox2_files() {
@@ -255,11 +324,20 @@ config_cumebox2_files() {
 
 config_octopus_flanet_files() {
     echo "信息：为 Octopus-Planet 配置特定文件 (model_database.conf)..."
-    
+
     # 自动下载 Octopus-Planet 相关文件（如果不存在）
     local config_file="$SRCPATH/image/octopus-flanet/model_database.conf"
-    
+
     download_file_if_missing "$config_file" || echo "警告：下载 Octopus-Planet 配置文件失败"
-    
+
     sudo cp "$config_file" "$ROOTFS/etc/model_database.conf" || echo "警告：复制 model_database.conf 失败"
-} 
+}
+
+config_orangepizero_files() {
+    echo "信息：配置 Orange Pi Zero 特定文件..."
+
+    # 清空 modules.conf 文件，避免加载不必要的模块
+    run_in_chroot "echo '' > /etc/modules-load.d/modules.conf"
+
+    echo "信息：Orange Pi Zero 特定配置完成。"
+}

build/functions/install.sh

@@ -10,7 +10,7 @@ prepare_dns_and_mirrors() {
     && printf '%s\\n' 'nameserver 1.1.1.1' 'nameserver 1.0.0.1' > /etc/resolv.conf \\
     && echo '信息：尝试更换镜像源...' \\
     && bash <(curl -sSL https://gitee.com/SuperManito/LinuxMirrors/raw/main/ChangeMirrors.sh) \\
-        --source mirrors.tuna.tsinghua.edu.cn --upgrade-software false --web-protocol http || echo '警告：更换镜像源脚本执行失败，可能网络不通或脚本已更改'
+        --source mirrors.ustc.edu.cn --upgrade-software false --web-protocol http || echo '警告：更换镜像源脚本执行失败，可能网络不通或脚本已更改'
     "
 }
 
@@ -77,6 +77,8 @@ config_base_files() {
     sudo cp scripts/kvmd-gencert scripts/kvmd-bootconfig scripts/kvmd-certbot scripts/kvmd-udev-hdmiusb-check scripts/kvmd-udev-restart-pass build/scripts/kvmd-firstrun.sh "$ROOTFS/usr/bin/"
     sudo chmod +x "$ROOTFS/usr/bin/kvmd-gencert" "$ROOTFS/usr/bin/kvmd-bootconfig" "$ROOTFS/usr/bin/kvmd-certbot" "$ROOTFS/usr/bin/kvmd-udev-hdmiusb-check" "$ROOTFS/usr/bin/kvmd-udev-restart-pass" "$ROOTFS/usr/bin/kvmd-firstrun.sh"
     
+    # 尝试下载或使用本地 rc.local 文件
+    download_rc_local "$platform_id"
     if [ -f "$SRCPATH/image/$platform_id/rc.local" ]; then
         echo "信息：复制设备特定的 rc.local 文件..."
         sudo cp "$SRCPATH/image/$platform_id/rc.local" "$ROOTFS/etc/"
@@ -246,7 +248,15 @@ apply_kvmd_tweaks() {
 
 
         # 根据 device_type 配置 ATX
-        if [ "$device_type" = "gpio" ]; then
+        if [[ "$device_type" == *"gpio-onecloud-pro"* ]]; then
+            echo "信息：电源控制设备类型为 gpio，设置 ATX 为 GPIO 并配置引脚..."
+            atx_setting="GPIO"
+             run_in_chroot "
+             sed -i 's/^ATX=.*/ATX=GPIO/' /etc/kvmd/atx.sh && \\
+             sed -i 's/SHUTDOWNPIN/gpiochip0 7/g' /etc/kvmd/custom_atx/gpio.sh && \\
+             sed -i 's/REBOOTPIN/gpiochip0 11/g' /etc/kvmd/custom_atx/gpio.sh
+             "
+        elif [[ "$device_type" == *"gpio-onecloud"* ]]; then
             echo "信息：电源控制设备类型为 gpio，设置 ATX 为 GPIO 并配置引脚..."
             atx_setting="GPIO"
              run_in_chroot "
@@ -261,10 +271,10 @@ apply_kvmd_tweaks() {
         fi
 
         # 配置视频设备
-        if [ "$device_type" = "video1" ]; then
+        if [[ "$device_type" == *"video1"* ]]; then
             echo "信息：视频设备类型为 video1，设置视频设备为 /dev/video1..."
             run_in_chroot "sed -i 's|/dev/video0|/dev/video1|g' /etc/kvmd/override.yaml"
-        elif [ "$device_type" = "kvmd-video" ]; then
+        elif [[ "$device_type" == *"video1"* ]]; then
             echo "信息：视频设备类型为 kvmd-video，设置视频设备为 /dev/kvmd-video..."
             run_in_chroot "sed -i 's|/dev/video0|/dev/kvmd-video|g' /etc/kvmd/override.yaml"
         else

build/platform/onecloud-pro

@@ -0,0 +1,3 @@
+PIKVM_MODEL=v2_model
+PIKVM_VIDEO=usb_video
+PIKVM_BOARD=onecloud-pro

build/platform/orangepi-zero

@@ -0,0 +1,3 @@
+PIKVM_MODEL=v2_model
+PIKVM_VIDEO=usb_video
+PIKVM_BOARD=orangepi-zero

configs/os/udev/v2-hdmiusb-rpi4.rules

@@ -4,3 +4,4 @@ KERNEL=="video[0-9]*", SUBSYSTEM=="video4linux", PROGRAM="/usr/bin/kvmd-udev-hdm
 KERNEL=="hidg0", GROUP="kvmd", SYMLINK+="kvmd-hid-keyboard"
 KERNEL=="hidg1", GROUP="kvmd", SYMLINK+="kvmd-hid-mouse"
 KERNEL=="hidg2", GROUP="kvmd", SYMLINK+="kvmd-hid-mouse-alt"
+KERNEL=="ttyUSB0", GROUP="kvmd", SYMLINK+="kvmd-hid"