适配 Onecloud Pro 设备

.github/workflows/build_img.yaml

@@ -9,6 +9,7 @@ on:
         type: choice
         options:
           - onecloud
+          - onecloud-pro
           - cumebox2
           - chainedbox
           - vm

build/build_img.sh

@@ -59,7 +59,7 @@ build_target() {
         onecloud)
             onecloud_rootfs
             local arch="armhf"
-            local device_type="gpio"
+            local device_type="gpio-onecloud"
             local network_type="systemd-networkd"
             ;;
         cumebox2)
@@ -97,6 +97,13 @@ build_target() {
             local network_type=""
             NEED_PREPARE_DNS=true
             ;;
+        onecloud-pro)
+            onecloud_pro_rootfs
+            local arch="aarch64"
+            local device_type="gpio-onecloud-pro video1"
+            local network_type=""
+            NEED_PREPARE_DNS=true
+            ;;
         *)
             echo "错误：未知或不支持的目标 '$target'" >&2
             exit 1
@@ -124,12 +131,15 @@ build_target() {
         chainedbox)
             pack_img "Chainedbox"
             ;;
-         e900v22c)
+        e900v22c)
             pack_img "E900v22c"
             ;;
-         octopus-flanet)
+        octopus-flanet)
             pack_img "Octopus-Flanet"
             ;;
+        onecloud-pro)
+            pack_img "Onecloud-Pro"
+            ;;
         *)
             echo "错误：未知的打包类型 for '$target'" >&2
             ;;
@@ -148,7 +158,7 @@ build_target() {
 # 检查是否提供了目标参数
 if [ -z "$1" ]; then
     echo "用法: $0 <target|all>"
-    echo "可用目标: onecloud, cumebox2, chainedbox, vm, e900v22c, octopus-flanet"
+    echo "可用目标: onecloud, cumebox2, chainedbox, vm, e900v22c, octopus-flanet, onecloud-pro"
     exit 1
 fi
 
@@ -167,6 +177,7 @@ if [ "$1" = "all" ]; then
     build_target "vm"
     build_target "e900v22c"
     build_target "octopus-flanet"
+    build_target "onecloud-pro"
     echo "信息：所有目标构建完成。"
 else
     build_target "$1"

build/functions/devices.sh

@@ -10,7 +10,7 @@ onecloud_rootfs() {
     local bootfs_sparse="$TMPDIR/6.boot.PARTITION.sparse"
     local rootfs_sparse="$TMPDIR/7.rootfs.PARTITION.sparse"
     local bootfs_loopdev="" # 存储 bootfs 使用的 loop 设备
-    local add_size_mb=400
+    local add_size_mb=600
 
     echo "信息：准备 Onecloud Rootfs..."
     ensure_dir "$TMPDIR"
@@ -159,7 +159,7 @@ e900v22c_rootfs() {
     local source_image="$SRCPATH/image/e900v22c/Armbian_23.08.0_amlogic_s905l3a_bookworm_5.15.123_server_2023.08.01.img"
     local target_image="$TMPDIR/rootfs.img"
     local offset=$((532480 * 512))
-    local add_size_mb=400
+    local add_size_mb=600
 
     echo "信息：准备 E900V22C Rootfs..."
     ensure_dir "$TMPDIR"
@@ -192,7 +192,7 @@ octopus_flanet_rootfs() {
     local target_image="$TMPDIR/rootfs.img"
     local boot_offset=$((8192 * 512))
     local rootfs_offset=$((1056768 * 512))
-    local add_size_mb=400
+    local add_size_mb=600
     local bootfs_loopdev=""
 
     echo "信息：准备 Octopus-Planet Rootfs..."
@@ -231,6 +231,37 @@ octopus_flanet_rootfs() {
     echo "信息：Octopus-Planet Rootfs 准备完成，loop 设备 $LOOPDEV 已就绪。"
 }
 
+onecloud_pro_rootfs() {
+    local source_image="$SRCPATH/image/onecloud-pro/Armbian-by-SilentWind_24.5.0_amlogic_Onecloud-Pro_jammy_6.6.28_server.img"
+    local target_image="$TMPDIR/rootfs.img"
+    local boot_offset=$((8192 * 512))
+    local rootfs_offset=$((1056768 * 512))
+    local add_size_mb=600
+    local bootfs_loopdev=""
+
+    echo "信息：准备 Octopus-Planet Rootfs..."
+    ensure_dir "$TMPDIR"; ensure_dir "$BOOTFS"
+    
+    # 自动下载源镜像文件（如果不存在）
+    download_file_if_missing "$source_image" || { echo "错误：下载 Octopus-Planet 原始镜像失败" >&2; exit 1; }
+    
+    cp "$source_image" "$target_image" || { echo "错误：复制 Octopus-Planet 原始镜像失败" >&2; exit 1; }
+
+    echo "信息：调整镜像分区大小 (分区 2)..."
+    sudo parted -s "$target_image" resizepart 2 100% || { echo "错误：使用 parted 调整分区 2 大小失败" >&2; exit 1; }
+
+    echo "信息：设置 rootfs 分区的 loop 设备..."
+    find_loop_device # 找 loop 给 rootfs
+    echo "信息：将 $target_image (偏移 $rootfs_offset) 关联到 $LOOPDEV..."
+    sudo losetup --offset "$rootfs_offset" "$LOOPDEV" "$target_image" || { echo "错误：设置 rootfs 分区 loop 设备 $LOOPDEV 失败" >&2; exit 1; }
+
+    echo "信息：检查并调整文件系统大小 (在 loop 设备上)..."
+    sudo e2fsck -f -y "$LOOPDEV" || { echo "警告：e2fsck 检查 $LOOPDEV 失败" >&2; exit 1; }
+    sudo resize2fs "$LOOPDEV" || { echo "错误：resize2fs 调整 $LOOPDEV 大小失败" >&2; exit 1; }
+
+    echo "信息：Octopus-Planet Rootfs 准备完成，loop 设备 $LOOPDEV 已就绪。"
+}
+
 # --- 特定设备的文件配置函数 ---
 
 config_cumebox2_files() {

build/functions/install.sh

@@ -10,7 +10,7 @@ prepare_dns_and_mirrors() {
     && printf '%s\\n' 'nameserver 1.1.1.1' 'nameserver 1.0.0.1' > /etc/resolv.conf \\
     && echo '信息：尝试更换镜像源...' \\
     && bash <(curl -sSL https://gitee.com/SuperManito/LinuxMirrors/raw/main/ChangeMirrors.sh) \\
-        --source mirrors.tuna.tsinghua.edu.cn --upgrade-software false --web-protocol http || echo '警告：更换镜像源脚本执行失败，可能网络不通或脚本已更改'
+        --source mirrors.ustc.edu.cn --upgrade-software false --web-protocol http || echo '警告：更换镜像源脚本执行失败，可能网络不通或脚本已更改'
     "
 }
 
@@ -246,7 +246,15 @@ apply_kvmd_tweaks() {
 
 
         # 根据 device_type 配置 ATX
-        if [ "$device_type" = "gpio" ]; then
+        if [[ "$device_type" == *"gpio-onecloud-pro"* ]]; then
+            echo "信息：电源控制设备类型为 gpio，设置 ATX 为 GPIO 并配置引脚..."
+            atx_setting="GPIO"
+             run_in_chroot "
+             sed -i 's/^ATX=.*/ATX=GPIO/' /etc/kvmd/atx.sh && \\
+             sed -i 's/SHUTDOWNPIN/gpiochip0 7/g' /etc/kvmd/custom_atx/gpio.sh && \\
+             sed -i 's/REBOOTPIN/gpiochip0 11/g' /etc/kvmd/custom_atx/gpio.sh
+             "
+        elif [[ "$device_type" == *"gpio-onecloud"* ]]; then
             echo "信息：电源控制设备类型为 gpio，设置 ATX 为 GPIO 并配置引脚..."
             atx_setting="GPIO"
              run_in_chroot "
@@ -261,10 +269,10 @@ apply_kvmd_tweaks() {
         fi
 
         # 配置视频设备
-        if [ "$device_type" = "video1" ]; then
+        if [[ "$device_type" == *"video1"* ]]; then
             echo "信息：视频设备类型为 video1，设置视频设备为 /dev/video1..."
             run_in_chroot "sed -i 's|/dev/video0|/dev/video1|g' /etc/kvmd/override.yaml"
-        elif [ "$device_type" = "kvmd-video" ]; then
+        elif [[ "$device_type" == *"video1"* ]]; then
             echo "信息：视频设备类型为 kvmd-video，设置视频设备为 /dev/kvmd-video..."
             run_in_chroot "sed -i 's|/dev/video0|/dev/kvmd-video|g' /etc/kvmd/override.yaml"
         else

build/platform/onecloud-pro

@@ -0,0 +1,3 @@
+PIKVM_MODEL=v2_model
+PIKVM_VIDEO=usb_video
+PIKVM_BOARD=onecloud-pro

configs/kvmd/atx.sh

@@ -20,6 +20,7 @@
 #                                                                            #
 # ========================================================================== #
 
+ATX=USBRELAY_HID
 echo $ATX
 case $ATX in
     GPIO)