feat(hid): 支持 CH9329 + OTG 组合模式

CH9329 负责键鼠，OTG 提供虚拟媒体、USB 网络和音频；分别配置设备、报告运行状态，并在 OTG 配置变更和回滚时保留未变化的 CH9329 实例。

补齐双设备校验、串口冲突检查、初始化引导和功能入口，修复组合模式下鼠标兼容选项缺失。

验证：独立功能版本的 591 项 Rust 库测试、前端生产构建、3 项引导逻辑测试及 2 组浏览器回归通过。未进行目标 KVM 硬件验证。

web/src/i18n/en-US.ts

@@ -1,5 +1,17 @@
 export default {
   hidGuide: {
+    driver_ch9329_otg: 'CH9329 + OTG composite mode',
+    compositeHelp: 'CH9329 handles keyboard and mouse. OTG provides virtual media, USB networking and USB audio. Enable advanced functions in their settings.',
+    wiring_ch9329_otg: 'Connect CH9329 to the dedicated keyboard/mouse port and OTG to a general USB port. Use an operation that switches video, keyboard/mouse and USB together.',
+    keyboardChannel: 'CH9329 input',
+    otgChannel: 'OTG functions',
+    kvmSwitch: 'KVM switch',
+    dedicatedHidPort: 'Keyboard/mouse port',
+    generalUsbPort: 'General USB port',
+    advancedFunctions: 'OTG advanced USB functions',
+    otgInactive: 'Not enabled',
+    otgConfigured: 'USB configured by host',
+    otgWaiting: 'Bound, waiting for host',
     missingDevice: 'The previous device {device} is unavailable. Check the current selection.',
     connectionTimeout: 'Connection timed out. Check the data cable and the controlled computer’s USB port. You can connect later or reconfigure.',
     "deviceTitle": "Driver and device",
@@ -50,7 +62,7 @@ export default {
     "pairTimeout": "The pairing window ended. You can open it again.",
     "reopenPairing": "Reopen pairing",
     "resetWarning": "Previous One-KVM HID bonds will be cleared. Remove the old device on the controlled computer before adding it again.",
-    "disableUsb": "Leaving USB OTG will disable: {functions}.",
+    "disableUsb": "Switching drivers will disable: {functions}.",
     "msd": "Virtual disk",
     "network": "USB network",
     "audio": "USB audio",

web/src/i18n/zh-CN.ts

@@ -1,5 +1,17 @@
 export default {
   hidGuide: {
+    driver_ch9329_otg: 'CH9329 + OTG 复合模式',
+    compositeHelp: 'CH9329 负责键盘和鼠标，OTG 负责虚拟磁盘、USB 网络和 USB 音频。高级功能需在各自设置中启用。',
+    wiring_ch9329_otg: 'CH9329 接 KVM 专用键鼠口，OTG 接通用 USB 口。请使用同时切换视频、键鼠和通用 USB 的操作。',
+    keyboardChannel: 'CH9329 键鼠',
+    otgChannel: 'OTG 高级功能',
+    kvmSwitch: 'KVM 切换器',
+    dedicatedHidPort: '专用键鼠口',
+    generalUsbPort: '通用 USB 口',
+    advancedFunctions: 'OTG 高级 USB 功能',
+    otgInactive: '未启用',
+    otgConfigured: '主机已配置 USB',
+    otgWaiting: '已绑定，等待主机连接',
     missingDevice: '原设备 {device} 已不可用，请检查当前选择。',
     connectionTimeout: '等待连接超时，请检查数据线及被控机 USB 端口。可稍后连接或重新配置。',
     "deviceTitle": "驱动与设备",
@@ -50,7 +62,7 @@ export default {
     "pairTimeout": "配对窗口已结束，可重新开启。",
     "reopenPairing": "重新开启配对",
     "resetWarning": "将清除原 One-KVM HID 绑定；请在被控机中删除旧设备后重新添加。",
-    "disableUsb": "切出 USB OTG 将关闭：{functions}。",
+    "disableUsb": "切换驱动将关闭：{functions}。",
     "msd": "虚拟磁盘",
     "network": "USB 网络",
     "audio": "USB 音频",