feat(web): 新增 HID 配置引导

web/src/i18n/zh-CN.ts

@@ -1,4 +1,86 @@
 export default {
+  hidGuide: {
+    missingDevice: '原设备 {device} 已不可用，请检查当前选择。',
+    connectionTimeout: '等待连接超时，请检查数据线及被控机 USB 端口。可稍后连接或重新配置。',
+    "deviceTitle": "驱动与设备",
+    "features": "功能配置",
+    "saveFeatures": "保存功能配置",
+    "configure": "配置驱动",
+    "reconfigure": "重新配置",
+    "driver": "HID 驱动",
+    "driver_otg": "USB OTG",
+    "driver_ch9329": "CH9329",
+    "driver_bluetooth": "蓝牙 HID",
+    "driver_none": "禁用",
+    "device_otg": "UDC",
+    "device_ch9329": "串口",
+    "device_bluetooth": "本机蓝牙适配器",
+    "host": "被控机",
+    "hostUsb": "被控机 USB",
+    "otgPort": "One-KVM OTG USB",
+    "serialLink": "CH340 → 串口连接 → CH9329",
+    "integratedCable": "CH340 + CH9329 一体线",
+    "dataCable": "USB 数据线",
+    "wireless": "蓝牙无线连接",
+    "wiring_otg": "One-KVM 的 OTG USB 端口 → USB 数据线 → 被控机 USB 端口。",
+    "wiring_ch9329": "One-KVM 通过串口连接 CH9329，CH9329 的 USB 连接被控机。",
+    "wiring_bluetooth": "在被控机打开系统设置 → 添加蓝牙设备 → 选择广播的 HID 设备名称。",
+    "disabledHelp": "禁用后 One-KVM 无法发送键盘和鼠标输入。",
+    "selectDevice": "请选择具体设备",
+    "noDevices": "未找到可用设备，请检查连接后刷新。",
+    "nameInvalid": "名称须为 1–64 个 UTF-8 字节，且不能含控制字符。",
+    "unconfigured": "尚未配置 HID",
+    "disabled": "HID 已禁用",
+    "legacyAuto": "自动选择（旧配置）",
+    "unknown": "状态未知或读取失败",
+    "ready": "HID 可用",
+    "preparing": "已连接，HID 准备中",
+    "paired": "已配对，等待连接",
+    "pairing": "等待配对",
+    "waiting": "已应用，等待连接",
+    "initializing": "正在初始化",
+    "appliedHelp": "配置已应用。关闭引导会保留配置和已完成的配对。",
+    "draftHelp": "选择驱动和设备，点击应用后才会更改当前配置。",
+    "dirty": "功能配置有未保存的修改。请返回保存，或放弃修改后继续。",
+    "returnSave": "返回保存",
+    "discard": "放弃修改并继续",
+    "pairInstructions": "请在被控机的系统设置中添加蓝牙设备，选择“{name}”。配对窗口为 120 秒。",
+    "pairTimeout": "配对窗口已结束，可重新开启。",
+    "reopenPairing": "重新开启配对",
+    "resetWarning": "将清除原 One-KVM HID 绑定；请在被控机中删除旧设备后重新添加。",
+    "disableUsb": "切出 USB OTG 将关闭：{functions}。",
+    "msd": "虚拟磁盘",
+    "network": "USB 网络",
+    "audio": "USB 音频",
+    "done": "完成",
+    "later": "稍后连接",
+    "configureLater": "稍后配置",
+    "useConfiguration": "使用此配置",
+    "repair": "重新配对",
+    "uncertain": "上次请求结果不明。可先检查连接；再次应用将重新清除绑定。",
+    "checkConnection": "检查已应用配置",
+    "resumeRetry": "已读取当前配置，与待应用选择不一致。请检查选择后重试。"
+},
+  bluetoothHid: {
+    paired: '已配对，等待电脑建立键鼠连接',
+    "description": "经典蓝牙键盘和相对鼠标。",
+    "adapter": "蓝牙适配器",
+    "name": "设备名称",
+    "peer": "被控电脑地址（可选）",
+    "peerHelp": "留空时复用唯一的已绑定设备，或在配对时选择电脑。",
+    "ready": "键盘和鼠标已就绪",
+    "pairing": "配对窗口剩余 {seconds} 秒",
+    "connected": "已连接，等待 HID 通道建立",
+    "waiting": "等待已配对电脑连接",
+    "unavailable": "蓝牙不可用或正在启动",
+    "openPairing": "开启配对（2 分钟）",
+    "closePairing": "关闭配对",
+    "disconnect": "断开连接",
+    "forget": "忘记电脑",
+    "windows": "Windows 11：设置 → 蓝牙和其他设备 → 添加设备 → 蓝牙。忘记设备后，请同时在 Windows 删除设备再重新配对。",
+    "applyFirst": "先应用 HID 设置，再开启配对。"
+},
+
   videoInput: {
     format: '输入格式',
     resolution: '分辨率',