feat(web): 新增 HID 配置引导

web/src/i18n/en-US.ts

@@ -1,4 +1,86 @@
 export default {
+  hidGuide: {
+    missingDevice: 'The previous device {device} is unavailable. Check the current selection.',
+    connectionTimeout: 'Connection timed out. Check the data cable and the controlled computer’s USB port. You can connect later or reconfigure.',
+    "deviceTitle": "Driver and device",
+    "features": "Feature configuration",
+    "saveFeatures": "Save features",
+    "configure": "Configure driver",
+    "reconfigure": "Reconfigure",
+    "driver": "HID driver",
+    "driver_otg": "USB OTG",
+    "driver_ch9329": "CH9329",
+    "driver_bluetooth": "Bluetooth HID",
+    "driver_none": "Disabled",
+    "device_otg": "UDC",
+    "device_ch9329": "Serial port",
+    "device_bluetooth": "Local Bluetooth adapter",
+    "host": "Controlled computer",
+    "hostUsb": "Host USB",
+    "otgPort": "One-KVM OTG USB",
+    "serialLink": "CH340 → Serial connection → CH9329",
+    "integratedCable": "CH340 + CH9329 integrated cable",
+    "dataCable": "USB data cable",
+    "wireless": "Bluetooth connection",
+    "wiring_otg": "One-KVM OTG USB port → USB data cable → controlled computer USB port.",
+    "wiring_ch9329": "Connect One-KVM to CH9329 over serial, then connect CH9329 USB to the controlled computer.",
+    "wiring_bluetooth": "On the controlled computer, open System Settings → Add Bluetooth device → select the advertised HID name.",
+    "disabledHelp": "One-KVM cannot send keyboard or mouse input while HID is disabled.",
+    "selectDevice": "Select a device",
+    "noDevices": "No devices found. Check the connection and refresh.",
+    "nameInvalid": "Use 1–64 UTF-8 bytes without control characters.",
+    "unconfigured": "HID is not configured",
+    "disabled": "HID is disabled",
+    "legacyAuto": "Automatic (legacy configuration)",
+    "unknown": "Unknown or unable to read status",
+    "ready": "HID ready",
+    "preparing": "Connected, preparing HID",
+    "paired": "Paired, waiting for connection",
+    "pairing": "Waiting for pairing",
+    "waiting": "Applied, waiting for connection",
+    "initializing": "Initializing",
+    "appliedHelp": "Configuration applied. Closing keeps the configuration and completed pairing.",
+    "draftHelp": "Choose a driver and device. The running configuration changes only when you apply.",
+    "dirty": "There are unsaved feature changes. Return to save them, or discard them to continue.",
+    "returnSave": "Return to save",
+    "discard": "Discard changes and continue",
+    "pairInstructions": "Add a Bluetooth device in the controlled computer’s system settings and select “{name}”. The pairing window lasts 120 seconds.",
+    "pairTimeout": "The pairing window ended. You can open it again.",
+    "reopenPairing": "Reopen pairing",
+    "resetWarning": "Previous One-KVM HID bonds will be cleared. Remove the old device on the controlled computer before adding it again.",
+    "disableUsb": "Leaving USB OTG will disable: {functions}.",
+    "msd": "Virtual disk",
+    "network": "USB network",
+    "audio": "USB audio",
+    "done": "Done",
+    "later": "Connect later",
+    "configureLater": "Configure later",
+    "useConfiguration": "Use this configuration",
+    "repair": "Pair again",
+    "uncertain": "The previous request has an unknown result. Check the connection first; applying again will clear bonds again.",
+    "checkConnection": "Check applied configuration",
+    "resumeRetry": "The current configuration differs from the pending selection. Review it and retry."
+},
+  bluetoothHid: {
+    paired: 'Paired; waiting for the computer to connect keyboard and mouse',
+    "description": "Classic Bluetooth keyboard and relative mouse.",
+    "adapter": "Bluetooth adapter",
+    "name": "Device name",
+    "peer": "Computer address (optional)",
+    "peerHelp": "Leave blank to reuse the only bonded device, or select a computer during pairing.",
+    "ready": "Keyboard and mouse ready",
+    "pairing": "Pairing open: {seconds}s",
+    "connected": "Connected; waiting for HID channels",
+    "waiting": "Waiting for the paired computer",
+    "unavailable": "Bluetooth unavailable or starting",
+    "openPairing": "Pair for 2 minutes",
+    "closePairing": "Close pairing",
+    "disconnect": "Disconnect",
+    "forget": "Forget computer",
+    "windows": "Windows 11: Settings → Bluetooth & devices → Add device → Bluetooth. After forgetting, remove the device in Windows before pairing again.",
+    "applyFirst": "Apply the HID settings first, then open pairing."
+},
+
   videoInput: {
     format: 'Input Format',
     resolution: 'Resolution',

web/src/i18n/zh-CN.ts

@@ -1,4 +1,86 @@
 export default {
+  hidGuide: {
+    missingDevice: '原设备 {device} 已不可用，请检查当前选择。',
+    connectionTimeout: '等待连接超时，请检查数据线及被控机 USB 端口。可稍后连接或重新配置。',
+    "deviceTitle": "驱动与设备",
+    "features": "功能配置",
+    "saveFeatures": "保存功能配置",
+    "configure": "配置驱动",
+    "reconfigure": "重新配置",
+    "driver": "HID 驱动",
+    "driver_otg": "USB OTG",
+    "driver_ch9329": "CH9329",
+    "driver_bluetooth": "蓝牙 HID",
+    "driver_none": "禁用",
+    "device_otg": "UDC",
+    "device_ch9329": "串口",
+    "device_bluetooth": "本机蓝牙适配器",
+    "host": "被控机",
+    "hostUsb": "被控机 USB",
+    "otgPort": "One-KVM OTG USB",
+    "serialLink": "CH340 → 串口连接 → CH9329",
+    "integratedCable": "CH340 + CH9329 一体线",
+    "dataCable": "USB 数据线",
+    "wireless": "蓝牙无线连接",
+    "wiring_otg": "One-KVM 的 OTG USB 端口 → USB 数据线 → 被控机 USB 端口。",
+    "wiring_ch9329": "One-KVM 通过串口连接 CH9329，CH9329 的 USB 连接被控机。",
+    "wiring_bluetooth": "在被控机打开系统设置 → 添加蓝牙设备 → 选择广播的 HID 设备名称。",
+    "disabledHelp": "禁用后 One-KVM 无法发送键盘和鼠标输入。",
+    "selectDevice": "请选择具体设备",
+    "noDevices": "未找到可用设备，请检查连接后刷新。",
+    "nameInvalid": "名称须为 1–64 个 UTF-8 字节，且不能含控制字符。",
+    "unconfigured": "尚未配置 HID",
+    "disabled": "HID 已禁用",
+    "legacyAuto": "自动选择（旧配置）",
+    "unknown": "状态未知或读取失败",
+    "ready": "HID 可用",
+    "preparing": "已连接，HID 准备中",
+    "paired": "已配对，等待连接",
+    "pairing": "等待配对",
+    "waiting": "已应用，等待连接",
+    "initializing": "正在初始化",
+    "appliedHelp": "配置已应用。关闭引导会保留配置和已完成的配对。",
+    "draftHelp": "选择驱动和设备，点击应用后才会更改当前配置。",
+    "dirty": "功能配置有未保存的修改。请返回保存，或放弃修改后继续。",
+    "returnSave": "返回保存",
+    "discard": "放弃修改并继续",
+    "pairInstructions": "请在被控机的系统设置中添加蓝牙设备，选择“{name}”。配对窗口为 120 秒。",
+    "pairTimeout": "配对窗口已结束，可重新开启。",
+    "reopenPairing": "重新开启配对",
+    "resetWarning": "将清除原 One-KVM HID 绑定；请在被控机中删除旧设备后重新添加。",
+    "disableUsb": "切出 USB OTG 将关闭：{functions}。",
+    "msd": "虚拟磁盘",
+    "network": "USB 网络",
+    "audio": "USB 音频",
+    "done": "完成",
+    "later": "稍后连接",
+    "configureLater": "稍后配置",
+    "useConfiguration": "使用此配置",
+    "repair": "重新配对",
+    "uncertain": "上次请求结果不明。可先检查连接；再次应用将重新清除绑定。",
+    "checkConnection": "检查已应用配置",
+    "resumeRetry": "已读取当前配置，与待应用选择不一致。请检查选择后重试。"
+},
+  bluetoothHid: {
+    paired: '已配对，等待电脑建立键鼠连接',
+    "description": "经典蓝牙键盘和相对鼠标。",
+    "adapter": "蓝牙适配器",
+    "name": "设备名称",
+    "peer": "被控电脑地址（可选）",
+    "peerHelp": "留空时复用唯一的已绑定设备，或在配对时选择电脑。",
+    "ready": "键盘和鼠标已就绪",
+    "pairing": "配对窗口剩余 {seconds} 秒",
+    "connected": "已连接，等待 HID 通道建立",
+    "waiting": "等待已配对电脑连接",
+    "unavailable": "蓝牙不可用或正在启动",
+    "openPairing": "开启配对（2 分钟）",
+    "closePairing": "关闭配对",
+    "disconnect": "断开连接",
+    "forget": "忘记电脑",
+    "windows": "Windows 11：设置 → 蓝牙和其他设备 → 添加设备 → 蓝牙。忘记设备后，请同时在 Windows 删除设备再重新配对。",
+    "applyFirst": "先应用 HID 设置，再开启配对。"
+},
+
   videoInput: {
     format: '输入格式',
     resolution: '分辨率',