fix: 补齐 ATX 控制器缺失接口并完成全项目 clippy -D warnings 修复

src/atx/types.rs

@@ -7,7 +7,7 @@ use serde::{Deserialize, Serialize};
 use typeshare::typeshare;
 
 /// Power status
-#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize)]
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
 #[serde(rename_all = "lowercase")]
 pub enum PowerStatus {
     /// Power is on
@@ -15,18 +15,13 @@ pub enum PowerStatus {
     /// Power is off
     Off,
     /// Power status unknown (no LED connected)
+    #[default]
     Unknown,
 }
 
-impl Default for PowerStatus {
-    fn default() -> Self {
-        Self::Unknown
-    }
-}
-
 /// Driver type for ATX key operations
 #[typeshare]
-#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize)]
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
 #[serde(rename_all = "lowercase")]
 pub enum AtxDriverType {
     /// GPIO control via Linux character device
@@ -34,36 +29,26 @@ pub enum AtxDriverType {
     /// USB HID relay module
     UsbRelay,
     /// Disabled / Not configured
+    #[default]
     None,
 }
 
-impl Default for AtxDriverType {
-    fn default() -> Self {
-        Self::None
-    }
-}
-
 /// Active level for GPIO pins
 #[typeshare]
-#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize)]
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize, Default)]
 #[serde(rename_all = "lowercase")]
 pub enum ActiveLevel {
     /// Active high (default for most cases)
+    #[default]
     High,
     /// Active low (inverted)
     Low,
 }
 
-impl Default for ActiveLevel {
-    fn default() -> Self {
-        Self::High
-    }
-}
-
 /// Configuration for a single ATX key (power or reset)
 /// This is the "four-tuple" configuration: (driver, device, pin/channel, level)
 #[typeshare]
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq)]
+#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Default)]
 #[serde(default)]
 pub struct AtxKeyConfig {
     /// Driver type (GPIO or USB Relay)
@@ -80,17 +65,6 @@ pub struct AtxKeyConfig {
     pub active_level: ActiveLevel,
 }
 
-impl Default for AtxKeyConfig {
-    fn default() -> Self {
-        Self {
-            driver: AtxDriverType::None,
-            device: String::new(),
-            pin: 0,
-            active_level: ActiveLevel::High,
-        }
-    }
-}
-
 impl AtxKeyConfig {
     /// Check if this key is configured
     pub fn is_configured(&self) -> bool {
@@ -100,7 +74,7 @@ impl AtxKeyConfig {
 
 /// LED sensing configuration (optional)
 #[typeshare]
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq)]
+#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Default)]
 #[serde(default)]
 pub struct AtxLedConfig {
     /// Whether LED sensing is enabled
@@ -113,17 +87,6 @@ pub struct AtxLedConfig {
     pub inverted: bool,
 }
 
-impl Default for AtxLedConfig {
-    fn default() -> Self {
-        Self {
-            enabled: false,
-            gpio_chip: String::new(),
-            gpio_pin: 0,
-            inverted: false,
-        }
-    }
-}
-
 impl AtxLedConfig {
     /// Check if LED sensing is configured
     pub fn is_configured(&self) -> bool {
@@ -132,7 +95,7 @@ impl AtxLedConfig {
 }
 
 /// ATX state information
-#[derive(Debug, Clone, Serialize, Deserialize)]
+#[derive(Debug, Clone, Serialize, Deserialize, Default)]
 pub struct AtxState {
     /// Whether ATX feature is available/enabled
     pub available: bool,
@@ -146,18 +109,6 @@ pub struct AtxState {
     pub led_supported: bool,
 }
 
-impl Default for AtxState {
-    fn default() -> Self {
-        Self {
-            available: false,
-            power_configured: false,
-            reset_configured: false,
-            power_status: PowerStatus::Unknown,
-            led_supported: false,
-        }
-    }
-}
-
 /// ATX power action request
 #[derive(Debug, Clone, Deserialize)]
 pub struct AtxPowerRequest {
@@ -179,7 +130,7 @@ pub enum AtxAction {
 
 /// Available ATX devices for discovery
 #[typeshare]
-#[derive(Debug, Clone, Serialize, Deserialize)]
+#[derive(Debug, Clone, Serialize, Deserialize, Default)]
 pub struct AtxDevices {
     /// Available GPIO chips (/dev/gpiochip*)
     pub gpio_chips: Vec<String>,
@@ -187,15 +138,6 @@ pub struct AtxDevices {
     pub usb_relays: Vec<String>,
 }
 
-impl Default for AtxDevices {
-    fn default() -> Self {
-        Self {
-            gpio_chips: Vec::new(),
-            usb_relays: Vec::new(),
-        }
-    }
-}
-
 #[cfg(test)]
 mod tests {
     use super::*;
@@ -266,5 +208,6 @@ mod tests {
         assert!(!state.power_configured);
         assert!(!state.reset_configured);
         assert_eq!(state.power_status, PowerStatus::Unknown);
+        assert!(!state.led_supported);
     }
 }