feat: 添加了对串口协议的继电器的支持

src/atx/executor.rs

@@ -4,6 +4,7 @@
 //! Each executor handles one button (power or reset) with its own hardware binding.
 
 use gpio_cdev::{Chip, LineHandle, LineRequestFlags};
+use serialport::SerialPort;
 use std::fs::{File, OpenOptions};
 use std::io::Write;
 use std::sync::atomic::{AtomicBool, Ordering};
@@ -38,6 +39,8 @@ pub struct AtxKeyExecutor {
     gpio_handle: Mutex<Option<LineHandle>>,
     /// Cached USB relay file handle to avoid repeated open/close syscalls
     usb_relay_handle: Mutex<Option<File>>,
+    /// Cached Serial port handle
+    serial_handle: Mutex<Option<Box<dyn SerialPort>>>,
     initialized: AtomicBool,
 }
 
@@ -48,6 +51,7 @@ impl AtxKeyExecutor {
             config,
             gpio_handle: Mutex::new(None),
             usb_relay_handle: Mutex::new(None),
+            serial_handle: Mutex::new(None),
             initialized: AtomicBool::new(false),
         }
     }
@@ -72,6 +76,7 @@ impl AtxKeyExecutor {
         match self.config.driver {
             AtxDriverType::Gpio => self.init_gpio().await?,
             AtxDriverType::UsbRelay => self.init_usb_relay().await?,
+            AtxDriverType::Serial => self.init_serial().await?,
             AtxDriverType::None => {}
         }
 
@@ -134,6 +139,36 @@ impl AtxKeyExecutor {
         Ok(())
     }
 
+    /// Initialize Serial relay backend
+    async fn init_serial(&self) -> Result<()> {
+        info!(
+            "Initializing Serial relay ATX executor on {} channel {}",
+            self.config.device, self.config.pin
+        );
+
+        let baud_rate = if self.config.baud_rate > 0 {
+            self.config.baud_rate
+        } else {
+            9600
+        };
+
+        let port = serialport::new(&self.config.device, baud_rate)
+            .timeout(Duration::from_millis(100))
+            .open()
+            .map_err(|e| AppError::Internal(format!("Serial port open failed: {}", e)))?;
+
+        *self.serial_handle.lock().unwrap() = Some(port);
+
+        // Ensure relay is off initially
+        self.send_serial_relay_command(false)?;
+
+        debug!(
+            "Serial relay channel {} configured successfully",
+            self.config.pin
+        );
+        Ok(())
+    }
+
     /// Pulse the button for the specified duration
     pub async fn pulse(&self, duration: Duration) -> Result<()> {
         if !self.is_configured() {
@@ -147,6 +182,7 @@ impl AtxKeyExecutor {
         match self.config.driver {
             AtxDriverType::Gpio => self.pulse_gpio(duration).await,
             AtxDriverType::UsbRelay => self.pulse_usb_relay(duration).await,
+            AtxDriverType::Serial => self.pulse_serial(duration).await,
             AtxDriverType::None => Ok(()),
         }
     }
@@ -220,6 +256,42 @@ impl AtxKeyExecutor {
         Ok(())
     }
 
+    /// Pulse Serial relay
+    async fn pulse_serial(&self, duration: Duration) -> Result<()> {
+        // Turn relay on
+        self.send_serial_relay_command(true)?;
+
+        // Wait for duration
+        sleep(duration).await;
+
+        // Turn relay off
+        self.send_serial_relay_command(false)?;
+
+        Ok(())
+    }
+
+    /// Send Serial relay command using cached handle
+    fn send_serial_relay_command(&self, on: bool) -> Result<()> {
+        let channel = self.config.pin as u8;
+
+        // LCUS-Type Protocol
+        // Checksum = A0 + channel + state
+        let state = if on { 1 } else { 0 };
+        let checksum = 0xA0u8.wrapping_add(channel).wrapping_add(state);
+        
+        let cmd = [0xA0, channel, state, checksum];
+
+        let mut guard = self.serial_handle.lock().unwrap();
+        let port = guard
+            .as_mut()
+            .ok_or_else(|| AppError::Internal("Serial relay not initialized".to_string()))?;
+
+        port.write_all(&cmd)
+            .map_err(|e| AppError::Internal(format!("Serial relay write failed: {}", e)))?;
+
+        Ok(())
+    }
+
     /// Shutdown the executor
     pub async fn shutdown(&mut self) -> Result<()> {
         if !self.is_initialized() {
@@ -237,6 +309,12 @@ impl AtxKeyExecutor {
                 // Release USB relay handle
                 *self.usb_relay_handle.lock().unwrap() = None;
             }
+            AtxDriverType::Serial => {
+                // Ensure relay is off before closing handle
+                let _ = self.send_serial_relay_command(false);
+                // Release Serial relay handle
+                *self.serial_handle.lock().unwrap() = None;
+            }
             AtxDriverType::None => {}
         }
 
@@ -256,6 +334,12 @@ impl Drop for AtxKeyExecutor {
             let _ = self.send_usb_relay_command(false);
         }
         *self.usb_relay_handle.lock().unwrap() = None;
+
+        // Ensure Serial relay is off and handle released
+        if self.config.driver == AtxDriverType::Serial && self.is_initialized() {
+            let _ = self.send_serial_relay_command(false);
+        }
+        *self.serial_handle.lock().unwrap() = None;
     }
 }
 
@@ -278,6 +362,7 @@ mod tests {
             device: "/dev/gpiochip0".to_string(),
             pin: 5,
             active_level: ActiveLevel::High,
+            baud_rate: 9600,
         };
         let executor = AtxKeyExecutor::new(config);
         assert!(executor.is_configured());
@@ -291,6 +376,20 @@ mod tests {
             device: "/dev/hidraw0".to_string(),
             pin: 0,
             active_level: ActiveLevel::High, // Ignored for USB relay
+            baud_rate: 9600,
+        };
+        let executor = AtxKeyExecutor::new(config);
+        assert!(executor.is_configured());
+    }
+
+    #[test]
+    fn test_executor_with_serial_config() {
+        let config = AtxKeyConfig {
+            driver: AtxDriverType::Serial,
+            device: "/dev/ttyUSB0".to_string(),
+            pin: 1,
+            active_level: ActiveLevel::High, // Ignored
+            baud_rate: 9600,
         };
         let executor = AtxKeyExecutor::new(config);
         assert!(executor.is_configured());

src/atx/mod.rs

@@ -72,12 +72,15 @@ pub fn discover_devices() -> AtxDevices {
                 devices.gpio_chips.push(format!("/dev/{}", name_str));
             } else if name_str.starts_with("hidraw") {
                 devices.usb_relays.push(format!("/dev/{}", name_str));
+            } else if name_str.starts_with("ttyUSB") || name_str.starts_with("ttyACM") {
+                devices.serial_ports.push(format!("/dev/{}", name_str));
             }
         }
     }
 
     devices.gpio_chips.sort();
     devices.usb_relays.sort();
+    devices.serial_ports.sort();
 
     devices
 }
@@ -92,6 +95,7 @@ mod tests {
         // Just verify the function runs without error
         assert!(devices.gpio_chips.len() >= 0);
         assert!(devices.usb_relays.len() >= 0);
+        assert!(devices.serial_ports.len() >= 0);
     }
 
     #[test]

src/atx/types.rs

@@ -33,6 +33,8 @@ pub enum AtxDriverType {
     Gpio,
     /// USB HID relay module
     UsbRelay,
+    /// Serial/COM port relay (LCUS type)
+    Serial,
     /// Disabled / Not configured
     None,
 }
@@ -78,6 +80,8 @@ pub struct AtxKeyConfig {
     pub pin: u32,
     /// Active level (only applicable to GPIO, ignored for USB Relay)
     pub active_level: ActiveLevel,
+    /// Baud rate for serial relay (start with 9600)
+    pub baud_rate: u32,
 }
 
 impl Default for AtxKeyConfig {
@@ -87,6 +91,7 @@ impl Default for AtxKeyConfig {
             device: String::new(),
             pin: 0,
             active_level: ActiveLevel::High,
+            baud_rate: 9600,
         }
     }
 }
@@ -185,6 +190,8 @@ pub struct AtxDevices {
     pub gpio_chips: Vec<String>,
     /// Available USB HID relay devices (/dev/hidraw*)
     pub usb_relays: Vec<String>,
+    /// Available Serial ports (/dev/ttyUSB*)
+    pub serial_ports: Vec<String>,
 }
 
 impl Default for AtxDevices {
@@ -192,6 +199,7 @@ impl Default for AtxDevices {
         Self {
             gpio_chips: Vec::new(),
             usb_relays: Vec::new(),
+            serial_ports: Vec::new(),
         }
     }
 }

web/src/types/generated.ts

@@ -118,6 +118,8 @@ export enum AtxDriverType {
 	Gpio = "gpio",
 	/** USB HID relay module */
 	UsbRelay = "usbrelay",
+	/** Serial/COM port relay (LCUS type) */
+	Serial = "serial",
 	/** Disabled / Not configured */
 	None = "none",
 }
@@ -151,6 +153,8 @@ export interface AtxKeyConfig {
 	pin: number;
 	/** Active level (only applicable to GPIO, ignored for USB Relay) */
 	active_level: ActiveLevel;
+	/** Baud rate for serial relay (start with 9600) */
+	baud_rate: number;
 }
 
 /** LED sensing configuration (optional) */
@@ -387,6 +391,7 @@ export interface AppConfig {
 export interface AtxKeyConfigUpdate {
 	driver?: AtxDriverType;
 	device?: string;
+	baud_rate?: number;
 	pin?: number;
 	active_level?: ActiveLevel;
 }
@@ -415,6 +420,8 @@ export interface AtxConfigUpdate {
 /** Available ATX devices for discovery */
 export interface AtxDevices {
 	/** Available GPIO chips (/dev/gpiochip*) */
+	/** Available Serial ports (/dev/ttyUSB*) */
+	serial_ports: string[];
 	gpio_chips: string[];
 	/** Available USB HID relay devices (/dev/hidraw*) */
 	usb_relays: string[];

web/src/views/SettingsView.vue

@@ -350,12 +350,14 @@ const atxConfig = ref({
     device: '',
     pin: 0,
     active_level: 'high' as ActiveLevel,
+    baud_rate: 9600,
   },
   reset: {
     driver: 'none' as AtxDriverType,
     device: '',
     pin: 0,
     active_level: 'high' as ActiveLevel,
+    baud_rate: 9600,
   },
   led: {
     enabled: false,
@@ -370,6 +372,7 @@ const atxConfig = ref({
 const atxDevices = ref<AtxDevices>({
   gpio_chips: [],
   usb_relays: [],
+  serial_ports: [],
 })
 
 // Encoder backend
@@ -927,13 +930,15 @@ async function saveAtxConfig() {
         driver: atxConfig.value.power.driver,
         device: atxConfig.value.power.device || undefined,
         pin: atxConfig.value.power.pin,
-        active_level: atxConfig.value.power.active_level,
+        baud_rate: atxConfig.value.power.baud_rate,
       },
       reset: {
         driver: atxConfig.value.reset.driver,
         device: atxConfig.value.reset.device || undefined,
         pin: atxConfig.value.reset.pin,
         active_level: atxConfig.value.reset.active_level,
+        baud_rate: atxConfig.value.reset.baud_rate
+        active_level: atxConfig.value.reset.active_level,
       },
       led: {
         enabled: atxConfig.value.led.enabled,
@@ -955,6 +960,8 @@ async function saveAtxConfig() {
 function getAtxDevicesForDriver(driver: string): string[] {
   if (driver === 'gpio') {
     return atxDevices.value.gpio_chips
+  } else if (driver === 'serial') {
+    return atxDevices.value.serial_ports
   } else if (driver === 'usbrelay') {
     return atxDevices.value.usb_relays
   }
@@ -1906,6 +1913,7 @@ onMounted(async () => {
                       <option value="none">{{ t('settings.atxDriverNone') }}</option>
                       <option value="gpio">{{ t('settings.atxDriverGpio') }}</option>
                       <option value="usbrelay">{{ t('settings.atxDriverUsbRelay') }}</option>
+                      <option value="serial">Serial (LCUS)</option>
                     </select>
                   </div>
                   <div class="space-y-2">
@@ -1918,7 +1926,7 @@ onMounted(async () => {
                 </div>
                 <div class="grid gap-4 sm:grid-cols-2">
                   <div class="space-y-2">
-                    <Label for="power-pin">{{ atxConfig.power.driver === 'usbrelay' ? t('settings.atxChannel') : t('settings.atxPin') }}</Label>
+                    <Label for="power-pin">{{ ['usbrelay', 'serial'].includes(atxConfig.power.driver) ? t('settings.atxChannel') : t('settings.atxPin') }}</Label>
                     <Input id="power-pin" type="number" v-model.number="atxConfig.power.pin" min="0" :disabled="atxConfig.power.driver === 'none'" />
                   </div>
                   <div v-if="atxConfig.power.driver === 'gpio'" class="space-y-2">
@@ -1928,6 +1936,16 @@ onMounted(async () => {
                       <option value="low">{{ t('settings.atxLevelLow') }}</option>
                     </select>
                   </div>
+                  <div v-if="atxConfig.power.driver === 'serial'" class="space-y-2">
+                    <Label for="power-baudrate">{{ t('settings.baudRate') }}</Label>
+                    <select id="power-baudrate" v-model.number="atxConfig.power.baud_rate" class="w-full h-9 px-3 rounded-md border border-input bg-background text-sm">
+                      <option :value="9600">9600</option>
+                      <option :value="19200">19200</option>
+                      <option :value="38400">38400</option>
+                      <option :value="57600">57600</option>
+                      <option :value="115200">115200</option>
+                    </select>
+                  </div>
                 </div>
               </CardContent>
             </Card>
@@ -1946,6 +1964,7 @@ onMounted(async () => {
                       <option value="none">{{ t('settings.atxDriverNone') }}</option>
                       <option value="gpio">{{ t('settings.atxDriverGpio') }}</option>
                       <option value="usbrelay">{{ t('settings.atxDriverUsbRelay') }}</option>
+                      <option value="serial">Serial (LCUS)</option>
                     </select>
                   </div>
                   <div class="space-y-2">
@@ -1958,7 +1977,7 @@ onMounted(async () => {
                 </div>
                 <div class="grid gap-4 sm:grid-cols-2">
                   <div class="space-y-2">
-                    <Label for="reset-pin">{{ atxConfig.reset.driver === 'usbrelay' ? t('settings.atxChannel') : t('settings.atxPin') }}</Label>
+                    <Label for="reset-pin">{{ ['usbrelay', 'serial'].includes(atxConfig.reset.driver) ? t('settings.atxChannel') : t('settings.atxPin') }}</Label>
                     <Input id="reset-pin" type="number" v-model.number="atxConfig.reset.pin" min="0" :disabled="atxConfig.reset.driver === 'none'" />
                   </div>
                   <div v-if="atxConfig.reset.driver === 'gpio'" class="space-y-2">
@@ -1968,6 +1987,16 @@ onMounted(async () => {
                       <option value="low">{{ t('settings.atxLevelLow') }}</option>
                     </select>
                   </div>
+                  <div v-if="atxConfig.reset.driver === 'serial'" class="space-y-2">
+                    <Label for="reset-baudrate">{{ t('settings.baudRate') }}</Label>
+                    <select id="reset-baudrate" v-model.number="atxConfig.reset.baud_rate" class="w-full h-9 px-3 rounded-md border border-input bg-background text-sm">
+                      <option :value="9600">9600</option>
+                      <option :value="19200">19200</option>
+                      <option :value="38400">38400</option>
+                      <option :value="57600">57600</option>
+                      <option :value="115200">115200</option>
+                    </select>
+                  </div>
                 </div>
               </CardContent>
             </Card>