添加电源管理支持

USB HID 继电器支持
GPIO 添加初始文件

configs/kvmd/custom_atx/gpio.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+case $1 in
+    short)
+    gpioset -m time -s 1 SHUTDOWNPIN=0
+    gpioset SHUTDOWNPIN=1
+    ;;
+    long)
+    gpioset -m time -s 5 SHUTDOWNPIN=0
+    gpioset SHUTDOWNPIN=1
+    ;;
+    reset)
+    gpioset -m time -s 1 REBOOTPIN=0
+    gpioset REBOOTPIN=1
+    ;;
+    *)
+    echo "No thing."
+esac

configs/kvmd/custom_atx/usbrelay_hid.py

@@ -0,0 +1,52 @@
+import sys
+import hid
+
+VENDOR_ID = 0x5131
+PRODUCT_ID = 0x2007
+
+def find_usbrelay():
+    for device in hid.enumerate():
+        if device.get("vendor_id") == VENDOR_ID and device.get("product_id") == PRODUCT_ID:
+            return device
+    return None
+
+def send_command(device_info, channel, onoff):
+    device = hid.device()
+    device.open(device_info['vendor_id'], device_info['product_id'])
+    if device is None:
+        print("Failed to open device.")
+        return
+
+    try:
+        cmd = [0xA0, channel, onoff, 0xA0 + channel + onoff]
+        device.write(bytearray(cmd))
+    finally:
+        device.close()
+
+def main():
+    if len(sys.argv) != 3:
+        print("Usage:\n"
+              "\tpython script.py id on|off")
+        return
+    
+    try:
+        id = int(sys.argv[1])
+        if sys.argv[2].lower() == 'on':
+            onoff = 1
+        elif sys.argv[2].lower() == 'off':
+            onoff = 0
+        else:
+            raise ValueError
+    except ValueError:
+        print("Invalid command, use 'on' or 'off'")
+        return
+    
+    device_info = find_usbrelay()
+    if device_info is None:
+        print("USB relay not found")
+    else:
+        send_command(device_info, id, onoff)
+        print(f"Sent command to channel {id}: {'ON' if onoff else 'OFF'}")
+
+if __name__ == "__main__":
+    main()

configs/kvmd/custom_atx/usbrelay_hid.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+case $1 in
+    short)
+    python3 /etc/kvmd/custom_atx/usbrelay_hid.py 1 on
+    sleep 1
+    python3 /etc/kvmd/custom_atx/usbrelay_hid.py 1 off
+    ;;
+    long)
+    python3 /etc/kvmd/custom_atx/usbrelay_hid.py 1 on
+    sleep 5
+    python3 /etc/kvmd/custom_atx/usbrelay_hid.py 1 off
+    ;;
+    reset)
+    python3 /etc/kvmd/custom_atx/usbrelay_hid.py 2 on
+    sleep 1
+    python3 /etc/kvmd/custom_atx/usbrelay_hid.py 2 off
+    ;;
+    *)
+    echo "No thing."
+esac