feat(rustdesk): 完整实现RustDesk协议和P2P连接

重大变更：
- 从prost切换到protobuf 3.4实现完整的RustDesk协议栈
- 新增P2P打洞模块(punch.rs)支持直连和中继回退
- 重构加密系统：临时Curve25519密钥对+Ed25519签名
- 完善HID适配器：支持CapsLock状态同步和修饰键映射
- 添加音频流支持：Opus编码+音频帧适配器
- 优化视频流：改进帧适配器和编码器协商
- 移除pacer.rs简化视频管道

扩展系统：
- 在设置向导中添加扩展步骤(ttyd/rustdesk切换)
- 扩展可用性检测和自动启动
- 新增WebConfig handler用于Web服务器配置

前端改进：
- SetupView增加第4步扩展配置
- 音频设备列表和配置界面
- 新增多语言支持(en-US/zh-CN)
- TypeScript类型生成更新

文档：
- 更新系统架构文档
- 完善config/hid/rustdesk/video/webrtc模块文档

web/src/i18n/en-US.ts

@@ -19,6 +19,8 @@ export default {
     off: 'Off',
     enabled: 'Enabled',
     disabled: 'Disabled',
+    later: 'Later',
+    restartNow: 'Restart Now',
     connected: 'Connected',
     disconnected: 'Disconnected',
     connecting: 'Connecting...',
@@ -202,6 +204,7 @@ export default {
     // Step titles
     stepAccount: 'Account Setup',
     stepVideo: 'Video Setup',
+    stepAudioVideo: 'Audio/Video Setup',
     stepHid: 'HID Setup',
     // Account
     setUsername: 'Set Admin Username',
@@ -220,6 +223,12 @@ export default {
     fps: 'Frame Rate',
     selectFps: 'Select FPS',
     noVideoDevices: 'No video devices detected',
+    // Audio
+    audioDevice: 'Audio Device',
+    selectAudioDevice: 'Select audio capture device',
+    noAudio: 'No audio',
+    noAudioDevices: 'No audio devices detected',
+    audioDeviceHelp: 'Select the audio capture device for capturing remote host audio. Usually on the same USB device as the video capture card.',
     // HID
     hidBackend: 'HID Backend',
     selectHidBackend: 'Select HID control method',
@@ -249,6 +258,15 @@ export default {
     otgHelp: 'USB OTG mode emulates HID devices directly through USB Device Controller. Requires hardware OTG support.',
     videoDeviceHelp: 'Select the video capture device for capturing the remote host display. Usually an HDMI capture card.',
     videoFormatHelp: 'MJPEG has best compatibility. H.264/H.265 uses less bandwidth but requires encoding support.',
+    // Extensions
+    stepExtensions: 'Extensions',
+    extensionsDescription: 'Choose which extensions to auto-start',
+    ttydTitle: 'Web Terminal (ttyd)',
+    ttydDescription: 'Access device command line in browser',
+    rustdeskTitle: 'RustDesk Remote Desktop',
+    rustdeskDescription: 'Remote access via RustDesk client',
+    extensionsHint: 'These settings can be changed later in Settings',
+    notInstalled: 'Not installed',
     // Password strength
     passwordStrength: 'Password Strength',
     passwordWeak: 'Weak',
@@ -436,7 +454,7 @@ export default {
     buildInfo: 'Build Info',
     detectDevices: 'Detect Devices',
     detecting: 'Detecting...',
-    builtWith: 'Built with Rust + Vue 3 + shadcn-vue',
+    builtWith: "Copyright {'@'}2025 SilentWind",
     networkSettings: 'Network Settings',
     msdSettings: 'MSD Settings',
     atxSettings: 'ATX Settings',
@@ -444,6 +462,17 @@ export default {
     httpSettings: 'HTTP Settings',
     httpPort: 'HTTP Port',
     configureHttpPort: 'Configure HTTP server port',
+    // Web server
+    webServer: 'Basic',
+    webServerDesc: 'Configure HTTP/HTTPS ports and bind address. Restart required for changes to take effect.',
+    httpsPort: 'HTTPS Port',
+    bindAddress: 'Bind Address',
+    bindAddressDesc: 'IP address the server listens on. 0.0.0.0 means all network interfaces.',
+    httpsEnabled: 'Enable HTTPS',
+    httpsEnabledDesc: 'Enable HTTPS encrypted connection (self-signed certificate will be auto-generated)',
+    restartRequired: 'Restart Required',
+    restartMessage: 'Web server configuration saved. A restart is required for changes to take effect.',
+    restarting: 'Restarting...',
     // User management
     userManagement: 'User Management',
     userManagementDesc: 'Manage user accounts and permissions',
@@ -528,6 +557,16 @@ export default {
     hidBackend: 'HID Backend',
     serialDevice: 'Serial Device',
     baudRate: 'Baud Rate',
+    // OTG Descriptor
+    otgDescriptor: 'USB Device Descriptor',
+    otgDescriptorDesc: 'Configure USB device identification',
+    vendorId: 'Vendor ID (VID)',
+    productId: 'Product ID (PID)',
+    manufacturer: 'Manufacturer',
+    productName: 'Product Name',
+    serialNumber: 'Serial Number',
+    serialNumberAuto: 'Auto-generated',
+    descriptorWarning: 'Changing these settings will reconnect the USB device',
     // WebRTC / ICE
     webrtcSettings: 'WebRTC Settings',
     webrtcSettingsDesc: 'Configure STUN/TURN servers for NAT traversal',
@@ -626,7 +665,7 @@ export default {
     binaryNotFound: '{path} not found, please install the required program',
     // ttyd
     ttyd: {
-      title: 'Web Terminal',
+      title: 'Ttyd Web Terminal',
       desc: 'Web terminal access via ttyd',
       open: 'Open Terminal',
       openInNewTab: 'Open in New Tab',
@@ -636,7 +675,7 @@ export default {
     },
     // gostc
     gostc: {
-      title: 'NAT Traversal',
+      title: 'GOSTC NAT Traversal',
       desc: 'NAT traversal via GOSTC',
       addr: 'Server Address',
       key: 'Client Key',
@@ -644,7 +683,7 @@ export default {
     },
     // easytier
     easytier: {
-      title: 'P2P Network',
+      title: 'Easytier Network',
       desc: 'P2P VPN networking via EasyTier',
       networkName: 'Network Name',
       networkSecret: 'Network Secret',
@@ -664,6 +703,10 @@ export default {
       relayServer: 'Relay Server',
       relayServerPlaceholder: 'hbbr.example.com:21117',
       relayServerHint: 'Relay server address, auto-derived from ID server if empty',
+      relayKey: 'Relay Key',
+      relayKeyPlaceholder: 'Enter relay server key',
+      relayKeySet: '••••••••',
+      relayKeyHint: 'Authentication key for relay server (if server uses -k option)',
       publicServerInfo: 'Public Server Info',
       publicServerAddress: 'Server Address',
       publicServerKey: 'Connection Key',

web/src/i18n/zh-CN.ts

@@ -18,6 +18,8 @@ export default {
     on: '开',
     off: '关',
     enabled: '已启用',
+    later: '稍后',
+    restartNow: '立即重启',
     disabled: '已禁用',
     connected: '已连接',
     disconnected: '已断开',
@@ -202,6 +204,7 @@ export default {
     // Step titles
     stepAccount: '账号设置',
     stepVideo: '视频设置',
+    stepAudioVideo: '音视频设置',
     stepHid: '鼠键设置',
     // Account
     setUsername: '设置管理员用户名',
@@ -220,6 +223,12 @@ export default {
     fps: '帧率',
     selectFps: '选择帧率',
     noVideoDevices: '未检测到视频设备',
+    // Audio
+    audioDevice: '音频设备',
+    selectAudioDevice: '选择音频采集设备',
+    noAudio: '不使用音频',
+    noAudioDevices: '未检测到音频设备',
+    audioDeviceHelp: '选择用于捕获远程主机音频的设备。通常与视频采集卡在同一 USB 设备上。',
     // HID
     hidBackend: 'HID 后端',
     selectHidBackend: '选择 HID 控制方式',
@@ -249,6 +258,15 @@ export default {
     otgHelp: 'USB OTG 模式通过 USB 设备控制器直接模拟 HID 设备。需要硬件支持 USB OTG 功能。',
     videoDeviceHelp: '选择用于捕获远程主机画面的视频采集设备。通常是 HDMI 采集卡。',
     videoFormatHelp: 'MJPEG 格式兼容性最好，H.264/H.265 带宽占用更低但需要编码支持。',
+    // Extensions
+    stepExtensions: '扩展设置',
+    extensionsDescription: '选择要自动启动的扩展服务',
+    ttydTitle: 'Web 终端 (ttyd)',
+    ttydDescription: '在浏览器中访问设备的命令行终端',
+    rustdeskTitle: 'RustDesk 远程桌面',
+    rustdeskDescription: '通过 RustDesk 客户端远程访问设备',
+    extensionsHint: '这些设置可以在设置页面中随时更改',
+    notInstalled: '未安装',
     // Password strength
     passwordStrength: '密码强度',
     passwordWeak: '弱',
@@ -436,7 +454,7 @@ export default {
     buildInfo: '构建信息',
     detectDevices: '探测设备',
     detecting: '探测中...',
-    builtWith: '基于 Rust + Vue 3 + shadcn-vue 构建',
+    builtWith: "版权信息 {'@'}2025 SilentWind",
     networkSettings: '网络设置',
     msdSettings: 'MSD 设置',
     atxSettings: 'ATX 设置',
@@ -444,6 +462,17 @@ export default {
     httpSettings: 'HTTP 设置',
     httpPort: 'HTTP 端口',
     configureHttpPort: '配置 HTTP 服务器端口',
+    // Web server
+    webServer: '基础',
+    webServerDesc: '配置 HTTP/HTTPS 端口和绑定地址，修改后需要重启生效',
+    httpsPort: 'HTTPS 端口',
+    bindAddress: '绑定地址',
+    bindAddressDesc: '服务器监听的 IP 地址，0.0.0.0 表示监听所有网络接口',
+    httpsEnabled: '启用 HTTPS',
+    httpsEnabledDesc: '启用 HTTPS 加密连接（将自动生成自签名证书）',
+    restartRequired: '需要重启',
+    restartMessage: 'Web 服务器配置已保存，需要重启程序才能生效。',
+    restarting: '正在重启...',
     // User management
     userManagement: '用户管理',
     userManagementDesc: '管理用户账号和权限',
@@ -528,6 +557,16 @@ export default {
     hidBackend: 'HID 后端',
     serialDevice: '串口设备',
     baudRate: '波特率',
+    // OTG Descriptor
+    otgDescriptor: 'USB 设备描述符',
+    otgDescriptorDesc: '配置 USB 设备标识信息',
+    vendorId: '厂商 ID (VID)',
+    productId: '产品 ID (PID)',
+    manufacturer: '制造商',
+    productName: '产品名称',
+    serialNumber: '序列号',
+    serialNumberAuto: '自动生成',
+    descriptorWarning: '修改这些设置将导致 USB 设备重新连接',
     // WebRTC / ICE
     webrtcSettings: 'WebRTC 设置',
     webrtcSettingsDesc: '配置 STUN/TURN 服务器以实现 NAT 穿透',
@@ -626,7 +665,7 @@ export default {
     binaryNotFound: '未找到 {path}，请先安装对应程序',
     // ttyd
     ttyd: {
-      title: '网页终端',
+      title: 'Ttyd 网页终端',
       desc: '通过 ttyd 提供网页终端访问',
       open: '打开终端',
       openInNewTab: '在新标签页打开',
@@ -636,7 +675,7 @@ export default {
     },
     // gostc
     gostc: {
-      title: '内网穿透',
+      title: 'GOSTC 内网穿透',
       desc: '通过 GOSTC 实现内网穿透',
       addr: '服务器地址',
       key: '客户端密钥',
@@ -644,7 +683,7 @@ export default {
     },
     // easytier
     easytier: {
-      title: 'P2P 组网',
+      title: 'Easytier 组网',
       desc: '通过 EasyTier 实现 P2P VPN 组网',
       networkName: '网络名称',
       networkSecret: '网络密钥',
@@ -664,6 +703,10 @@ export default {
       relayServer: '中继服务器',
       relayServerPlaceholder: 'hbbr.example.com:21117',
       relayServerHint: '中继服务器地址，留空则自动从 ID 服务器推导',
+      relayKey: '中继密钥',
+      relayKeyPlaceholder: '输入中继服务器密钥',
+      relayKeySet: '••••••••',
+      relayKeyHint: '中继服务器认证密钥（如果服务器使用 -k 选项）',
       publicServerInfo: '公共服务器信息',
       publicServerAddress: '服务器地址',
       publicServerKey: '连接密钥',