| Raspberry Pi's health is at risk | |
| This is not a drill! A red icon indicates a current issue, a yellow one that was observed since the device booted up |
| Raspberry Pi's health is at risk | |
| This is not a drill! A red icon indicates a current issue, a yellow one that was observed since the device booted up |
| Undervoltage detected | |
| Make sure your power supply and cabling are providing enough power to the Raspberry Pi (3A minimum) |
| Overheating detected | |
| Frequency capping due to overheating, please improve cooling of the Raspberry Pi |
| Raspberry Pi's health is at risk | |
| This is not a drill! A red icon indicates a current issue, a yellow one that was observed in the past |
| Fan failed | |
| A fan error occured, please check the log |
| Runtime settings & tools |
| WebRTC is not supported by this browser |
| Direct HTTP H.264 streaming is not supported |
| H.264 is not supported by this browser |
| Resolution: | ||
| JPEG quality: | ||
| JPEG max fps: | ||
| H.264 kbps: | ||
| H.264 gop: | ||
| Video mode: |
|
|
| Orientation: |
|
|
| Audio volume: | ||
| Microphone: |
|
|
| Microphone: |
|
| Keyboard mode: | |
| Mouse mode: |
| Swap Left Ctrl and Caps keys: |
|
| Mouse polling: | ||||||
| Relative sensitivity: | ||||||
| Squash relative moves: |
|
|||||
| Reverse scrolling: |
|
|||||
| Cumulative scrolling: |
|
|||||
| Scroll rate: | ||||||
| Show the blue dot: |
|
| Ask page close confirmation: |
|
| Expand for the entire tab by default: |
|
| Bad link mode (release keys immediately): |
|
| Bad link mode (release keys immediately): |
|
| Connect HID to Server: |
|
| Mouse jiggler: |
|
| Mute HID input events: |
|
| Connect main USB to Server: |
|
| Enable locator LED: |
|
| Ask click confirmation: |
|
| Mass Storage Drive is offline |
| Current image is broken! | |
| Perhaps uploading was interrupted |
| Current image is too big for DVD! | |
| The maximum is 31.6GiB. Please switch to the Flash mode. | The maximum is 31.6GiB. Please switch to the Flash mode. |
| Current image is out of storage | |
| This image was connected manually using kvmd-otgmsd |
| Read-write mode is enabled | |
| Do not turn off PiKVM while this is active to prevent filesystem corruption. Use read-only mode where possible, as writing to SD card often can reduce its lifespan. |
| The image is being downloaded from PiKVM | |
| Please wait |
| Image: |
| Drive mode: |
|
Writable: |
|
|
| 文件内容: |
|
| Another user uploads an image |
| Specify a local file: | |
| Or paste a URL: | |
| Upload partition: |
| New image: | |
| Upload size: |
| Note: | • Don't close the browser page until the upload is complete. |
| • To speed up the upload, close the stream window. |
| Script time: | 00:00:00.0 | |
| Scripted events: | 0 | include delays |
| Infinite loop playback: |
|
| using host keymap |
| Slow typing: |
|
| Hide input text: |
|
| Ask paste confirmation: |
|
| for | text recognition |
| • Press Enter to recognize and copy text to clipboard | |||
| • Press Esc to cancel selection | |||
| Ask the magic confirmation: |
|
|
PiKVM Switch is attached
Select a port or perform any available action like ATX click |
|
| Good news! Your switch is ready to get the firmware update | |
| Please follow the instructions when you decide to install it. |
| Ask ATX click confirmation: |
|
|
PiKVM Switch is attached
Select a port or perform any available action like ATX click |
|
| Good news! Your switch is ready to get the firmware update | |
| Please follow the instructions when you decide to install it. |
| Ask ATX click confirmation: |
|
|
||||||||||||||||
| Selected port: | ||||
| Inactive port: | ||||
| Blinking beacon: | ||||
|
|
|
|
|
|
| Flashing downlink: | ||||
| Bootloader mode: |
|
|||||
No data
PiKVM Project | Documentation | One-KVM Project | One-KVM Documentation